DALBO MAXICUT 920, Manual, Page: 13 / 49

MAXICUT
Page 13
Limitations in the use of the machine
The following describes what the machine may/must not be used for:
•
The machine may only be used for tilling organic plant material in agricultural areas that have been culti-
vated. Those areas to be tilled must have been subject to normal agricultural maintenance, i.e. without sig-
nificant bumps or holes. Any rocks in the field must be collected from the normal scope of the area. The area
must be reasonably drained.
•
The plant material must not be any stiffer than corn stalks.
•
The machine may only be used after first being attached to an agricultural tractor, by way of connection to
the rear 3-point hitch.
•
The machine can work at a maximum speed of 20 km/h. The speed shall however always be adjusted to the
nature of the area. This means, for example, that transverse crops must be driven over at a much lower
speed to avoid extreme pressure on the machine.
Any other use of the machine, which does not fulfil the aforementioned conditions, will be considered as
unauthorised use, and will therefore be in breach of the manufacturer's warranty.