DALBO MAXICUT 920, Manual, Page: 14 / 49

MAXICUT
Page 14
Connecting and disconnecting
Connecting
The MAXICUT 920 can be fitted with 2 different types of features.
One feature designed for installing in the tractor's three-point suspension; the height adjust-
ing via the suspension.
The machine can also be fitted with a hydraulic feature that adjusts the height via hydraulics,
as well as hydro-clips. This feature is installed in the drawbar
Fig.2
MAXICUT with lift feature. The machine is
connected to the tractor's lift arms and
is secured with ball joints and splitters
(A)
MAXICUT with hydraulic pull. The ma-
chine is installed in the tractor's drawbar
and the plinth is secured with a split (B)
or lock device if there is a ball hitch.
Remember to secure the connection with ball joints and linchpins.
Hydraulics
By default, the MAXICUT 920 requires three double-acting hydraulic jacks.
Hose markings
Cylinder name Colour Outlet Function
Timing belt cylinder
and hydraulic pull if
installed
Yel-
low
Double-acting
Lift the MAXICUT up on the
wheels and down into working
mode.
Hydraulics
Weight distribution,
as well as lift to
transport position
Red Double-acting Raises the side frames up/down.
Unfolding and fold-
ing, as well as sup-
port legs
Blue Double-acting
Folds the side frames in and out.
With the help of ball valves, the
support leg can be raised and
lowered.
The yellow and red hydraulic system is equipped with pilot-operated check valves. This re-
sults in a supply of pressure in one of the hoses to enable the cylinders to move. The cylin-
ders, therefore, do not move if the tractor's lever is shifted to the on position.
A
B