Daktronics All Sport 5000 Operation Manual Download Page 85

Page: 85 / 416

Pitch and Speed

New Code

LCD Display

Action

MENU-MAIN
NEW CODE?

Press <

YES

> to begin selection of a new code from

the ENTER CODE prompt.

Press <

> to resume the game in progress using

the current data and exit the Menu.

Press the down arrow key to scroll to the next

selection.

Dimming Menu

The

Dimming Menu

allows the user to change the brightness of the scoreboard.

LCD Display

Action

MENU- Dimming
level (0-9): nn%

current level

None

bright

<0>

90%

<1>

80%

<2>

70%

<3>

60%

<4>

50%

<5>

40%

<6>

30%

<7>

20%

<8>

10%

<9>

Press <

> through <

> or use the arrow keys <

> to select the intensity for the digits on the

scoreboard.

Press <

> to resume the game in progress using

the current data, and exit the Menu.

Press the down arrow key <

> to scroll to the next

selection.

Note:

Dim levels pertain to outdoor LED products.

Indoor LED and incandescent products only support

one level of dimming at 50%.

Radar Gun Type

LCD Display

Action

RADAR GUN TYPE
*JUGS

←→

STALKER

current setting

Press the left or right arrow keys to select the

type of radar gun to interface with and press

ENTER

Summary of Contents for All Sport 5000

































































































































































































































































































































































































































Search results

Summary of Contents for All Sport 5000

Reviews:

Related manuals for All Sport 5000

Brands by name

Popular brands

Daktronics All Sport 5000, Operation Manual

Search results

Summary of Contents for All Sport 5000

Reviews:

Related manuals for All Sport 5000

Brands by name

Popular brands