Daktronics All Sport 5000, Operation Manual

Page: 19 / 416

2 Introduction
1.1 Console Overview
The All Sport
®
5000 Series console is a state-of-the-art scoring and timing system. The
console’s liquid crystal display (LCD) will guide you through the operation of the system.
As a safety feature, this product has a 3-wire ground type plug equipped with a third
(grounding) pin. This plug only fits into a grounding-type power outlet.
Note: If you are unable to insert the plug into the outlet, contact a qualified electrician to
replace the obsolete outlet.
When opening the packages, inspect for shipping damage such as rattles and dents. See
that all equipment is included as shown on the packing slip. Immediately report any
deficiencies to Daktronics. Save all packing materials for shipping if warranty repair or
exchange is needed.
1.2 Revision History
Version 1.0 Release Date: 3 January 2000
•
Initial software release
Version 1.0.1 Release Date: 11 January 2000
•
Fixed the clock =0 indicator (period end) so it will update when count up/down is
changed
•
Made the shot clock not blank when the clock is set to count up
•
The time-of-day (TOD) clock only works with 60Hz, made so it will work with 50Hz
power also. This includes having it count this in the tenths/hundredths field so the
TOD will be in sync with the driver time
•
The timeout ON/OFF key does not allow for a cold key exit once it is in edit of the
time
•
Increase the refresh rate of the drivers
•
When set to TOD display, the TOD was not being sent out on RTD
•
Modified the soccer and baseball settings function to check if it is called while in the
game or before the game for certain settings that change what is displayed on the
scoreboards
•
Add code 0000 to do keyboard test and LCD test