Daktronics All Sport 5000, Operation Manual

Page: 262 / 416

Karate Operations 245
16.4 Settings
The following settings can be edited by the user when EDIT SETTINGS has been selected
from the Main Menu.
Main Clock
LCD Display Action
MAIN CLOCK-TIME
PERIOD mm:ss
mm:ss
=
current setting
Enter the correct amount of time per period in minutes
and seconds on the number pad and press <ENTER> .
For example, 5:00.
Note: Pressing <ENTER> to select the period time as the
main clock setting will increment the current period
number if the clock value was previously zero.
Switch Output
The All Sport 5000 series console has a relay that can be used to drive a number of different
devices. The relay can be configured to operate under different settings. The default setting is
1-CLOCK= 0.
To display the relay settings that you want to select:
Press the number (0,1,2,3) key as a shortcut or use the left and right arrow keys to scroll to the
desired setting.
Press
<YES> to select the new setting.
Press
<NO> or the down arrow key to leave the relay setting and display the next prompt.
The possible settings for relay output are as follows:
Setting Result
0
-
DISABLED
SWITCH OUTPUT=n
0-DISABLED?
N
=
current setting
The relay remains open at all times and any external devices
are disabled.
1-CLOCK = 0
SWITCH OUTPUT=n
1-CLOCK =0?
N
= current setting
In count down mode, the relay closes when the main clock
reaches zero and remains closed until a nonzero value is
entered.
In count up mode, the relay closes when the main clock
reaches the proper period, break, or overtime length and
opens when any other value is entered.