Daktronics All Sport 5000 Operation Manual Download Page 118

Page: 118 / 416

Basketball Operations

101

Team Fouls

LCD Display

Action

TEAM FOULS-MODE
UPDATE PLAYER?

This feature must be enabled for all player-foul-

points panels.

Press <

YES

> to allow entry of a player number

after the home or guest team fouls are

incremented or decremented.

Press <

> to prevent entry of a player number.

TEAM FOULS-MODE
1-ON-1 BONUS nn*

current setting

Enter the number of team fouls permitted before

the 1-on-1 bonus applies on the number pad and

press <

ENTER

The home and guest team fouls stop incrementing

at this number unless the 2-shot bonus is enabled.

Enter zero to disable this feature.

TEAM FOULS-MODE
2-SHOT BONUS nn*

current setting

Enter the number of team fouls permitted before

the 2-shot bonus applies on the number pad and

press <

ENTER

Enter zero to disable this feature.

Select Captions

LCD Display

Action

Select captions
on 1

←

→

2 off

This menu option allows for the controlled backlit

captions to be turned ON/OFF.

Press the <

> key to select ON and OFF for

captions controlled by control #1.

Press the <

> key to select ON and OFF for

captions controlled by control #2.

Summary of Contents for All Sport 5000

































































































































































































































































































































































































































Search results

Summary of Contents for All Sport 5000

Reviews:

Brands by name

Popular brands

Daktronics All Sport 5000, Operation Manual

Search results

Summary of Contents for All Sport 5000

Reviews:

Brands by name

Popular brands