Daktronics All Sport 5000 Operation Manual Download Page 77

Page: 77 / 416

Baseball Operations

Auto Increment Inning

The <

OUT +1

> key automatically increments the inning and resets the out number to zero

when:

•

The Auto Inning Increment setting is on.

•

The

Home

AT BAT indicator is on.

•

The current out number is 3.

The <

OUT +1

> key turns on the

Home

AT BAT indicator when:

•

The Auto Inning Increment setting is on.

•

The

Guest

AT BAT indicator is on.

•

The current out number is 3.

LCD Display

Action

auto increment
INNING y/n?
n*

current setting

Press <

YES

> to automatically increment the inning.

Press <

> to disable this function.

Score by Inning

Some scoreboards display both the total score and the score by inning.

Note:

If the Score By Inning setting is not enabled, the

Display Innings

and

Inning

Sequence

settings are not displayed.

LCD Display

Action

score by inning
y/n? n*

current setting

Press <

YES

> if the scoreboard displays the score

by inning.

Press <

> if the scoreboard only displays the total

score.

Inning Sequence
Note:

The Inning Sequence setting is not displayed if the Score By Inning setting is not

enabled.

Use Inning Sequence when the number of innings played exceeds the number of innings that
can be displayed on the scoreboard.

Summary of Contents for All Sport 5000

































































































































































































































































































































































































































Search results

Summary of Contents for All Sport 5000

Reviews:

Daktronics All Sport 5000, Operation Manual, Page: 77 / 416

Search results

Summary of Contents for All Sport 5000

Reviews: