Daktronics All Sport 5000 Operation Manual Download Page 326

Page: 326 / 416

Water Polo Operations

309

Time Outs

Note 1:

If a full or partial time out is not needed for the HOME or GUEST <

TIME OUT

keys, enter zero for the number of time outs.

Note 2:

If a full or partial time out is not needed for <

TIME OUT ON/OFF

enter zero for

the time.

Note3:

The number for each type of time out must be manually entered for an overtime

period using the <

EDIT

> <

TIME OUT

> key sequence for each team.

LCD Display

Action

TIME OUTS-MODE
FULL n*

current setting

Enter the number of full time outs on the number pad

and press <

ENTER

TIME OUTS-TIME
FULL mm:ss*

mm:ss

current setting

Enter the amount of time for a full time out in minutes

and seconds on the number pad and press

ENTER

For example, 1:00.

TIME OUTS-MODE
SHOW ON MAIN? n

current setting

Press <

YES

> to display the time out time on the LCD

and the main clock digits of the scoreboard while the

time out clock is active.

Press <

> to display the time out time on the LCD

only.

Summary of Contents for All Sport 5000

































































































































































































































































































































































































































Search results

Summary of Contents for All Sport 5000

Reviews:

Related manuals for All Sport 5000

Brands by name

Popular brands

Daktronics All Sport 5000, Operation Manual

Search results

Summary of Contents for All Sport 5000

Reviews:

Related manuals for All Sport 5000

Brands by name

Popular brands