manualshive.com logo in svg

Daktronics All Sport 5000, Operation Manual

Share
Download
Daktronics All Sport 5000 Operation Manual Download Page 210

 

Volleyball Operations 

193 

 

(Continued from previous  page)

 

LCD Display 

Action 

 

HOME PLAYER nn   
NOT FOUND, ADD?  

nn

 = 

current setting

 

 

If the player is not in the roster, this prompt asks if 

the player should be added.   

 

Press <

YES

> to add the player to the roster and 

credit the play to that player. 

 

Press <

NO

> to decline the entry of the player 

number.  

 

 

HOME PLAYER nn   
ROSTER FULL      

nn

 = 

current setting

 

 

 

This message displays when the answer to the 

previous prompt is YES and the roster is full. 

 

HOME PLAYER nn   
aces      nn  

nn

 = 

current setting

 

 

 

The players number and number of points display if 

the player was found in the game or correctly added 

to the roster. 

 

Serve 

 

LCD Display 

Action 

 

HOME serve 
ON               

 

 

Press the home or guest

 <SERVE> 

key, to turn on 

the possession indicator for that team. 

 

 

 

HOME serve  
OFF              

 

 

To turn off the possession indicator, press the same 

<SERVE>

 key a second time or press the opposite 

<SERVE>

 key. 

 

 

 
In Game/Out of Game 

The 

<IN GAME>

 and 

<OUT OF GAME>

 keys are only functional when the Home or Guest 

<PLAYER>

 key has been pressed. 

 
Delete Player 

The 

<DELETE PLAYER> 

key is only functional when the Home or Guest <

PLAYER

> key 

has been pressed.

 

 

Summary of Contents for All Sport 5000

































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands