Daktronics All Sport 5000 Operation Manual Download

Page: 200 / 416

Track Operations

183

(Continued from previous page)

LCD Display

Action

HOME-TEAM NAME
aaaaaaaaaaaaa*

The TEAM NAME (LL-2441) insert must be

inserted to enter the Team Name Message

Center (TNMC) settings.

The TNMC is updated after each selection is

completed.

Use the

COLUMNS, ROWS

and

STROKE

keys to

select the

WIDTH, HEIGHT

and

FONT

of the

TNMC. The defaults are 48 columns, 8 rows and

single stroke.

Enter up to fifteen (15) characters for the team

name and press

<ENTER>.

Reinsert the TRACK (LL-2439) insert to continue.

HOME-TEAM abbr
aaaaaaaaaa*

The TEAM NAME (LL-2441) insert must be

inserted to enter the Team Name Message

Center (TNMC) settings.

The TNMC is updated after each selection is

completed.

Use the

COLUMNS, ROWS

and

STROKE

keys to

select the

WIDTH, HEIGHT

and

FONT

of the

TNMC. The defaults are 48 columns, 8 rows and

single stroke.

Enter up to fifteen (15) characters for the team

abbreviation and press

<ENTER>.

Reinsert the TRACK (LL-2439) insert to continue.

Display Menu

The

DISPLAY MENU

allows the user to start and edit the segment timer or to change the

brightness of the scoreboard.

LCD Display

Action

MENU-MAIN ENTER
DISPLAY MENU?

Press

<YES>

to select the Display submenu and

show the first prompt on the LCD. Press the down

arrow key to scroll to the next selection.

Summary of Contents for All Sport 5000

































































































































































































































































































































































































































Search results

Summary of Contents for All Sport 5000

Reviews:

Related manuals for All Sport 5000

Brands by name

Popular brands

Daktronics All Sport 5000, Operation Manual

Search results

Summary of Contents for All Sport 5000

Reviews:

Related manuals for All Sport 5000

Brands by name

Popular brands