Dakewe (Shenzhen) Medical Equipment Co., Ltd
73
7.Reagent Processing
7.1 Reagent Filling / Evacuation / Replacement
The following steps can only be carried out by trained laboratory personnel with reagent
handling experience.
When handling the reagents used in this instrument, be sure to wear personal protective
equipment and operate with caution.
Dispose of waste reagents carefully in accordance with local laws and regulations and
waste management policies of the Company or organization.
Do not change reagents or fill empty reagent bottles during program operation. This can
cause serious damage to the instrument.
Make sure to place the reagent bottle in the correct position according to the reagent
bottle layout on the display screen.
1. Remove the reagent bottle from the reagent case. Unscrew the bottle cap
(Figure
66-1)
.
2. Thoroughly clean the reagent bottle before refilling.
3. The top and bottom filling liquid level are imprinted on the front of each reagent
bottle as a guide. During filling, use a funnel to keep it clean.
4. After filling, the cap needs to be screwed back to the bottle.
5. Put the filled reagent bottle back into the reagent case. When inserting a reagent
bottle, make sure that the reagent bottle joint’s seal ring is intact and accurately
inserted in the socket
(Figure 66-2)
. A clicking sound indicates that you have
properly installed the reagent bottle in place.
Figure 66
Summary of Contents for HP300 Plus
Page 1: ...HP300 Plus Automatic Tissue Processor User s Manual Revision V1 4 English Version Jan 2023...
Page 21: ...Dakewe Shenzhen Medical Equipment Co Ltd 17 necessary...
Page 67: ...Dakewe Shenzhen Medical Equipment Co Ltd 63 Figure 56...
