DAKEWE HP300 Plus, User Manual

Page: 10 / 107

6 Dakewe (Shenzhen) Medical Equipment Co., Ltd
Unique Device Identifier
Importer
The CE marking is the manufacturer’s declaration that the medical
product meets the requirements of the applicable EC directives and
regulations
UKCA mark
Name and Address of UK responsible person
FCC-Approved Equipment
1.2 Instrument Use
The automatic tissue processor is used for dehydration of samples prior to pathological
analysis and is intended for use in pathology laboratories only to perform the following tasks:
• Fixation, dehydration, transparency and wax immersion treatment of tissue samples;
• Only operate the instrument as described in this Manual.
Any other ways of use are regarded as inappropriate!
1.3 Working principle
The user puts the specimen with tissue into the tissue processing tank of the instrument,
and then clicks to start the pre-set dehydration program. The dehydrator will extract the
reagents into the tissue tank one by one according to the dehydration program set by the user
for soaking treatment. Each step can be individually set for dehydration time, temperature,
pressure mode and other parameters. After the program is executed, the dehydrator will
automatically prompt the user to remove the specimen in time.
1.4 Personnel Qualification
• Only trained laboratory staff can operate.
• Only operate the instrument as described in this Manual.
1.5 Instrument Model
The serial number (SN) of the instrument is on a nameplate attached to the back of the
processor.