DAKEWE HP300 Plus, User Manual

Page: 35 / 107

Dakewe (Shenzhen) Medical Equipment Co., Ltd 31
and splash.

The paraffin cylinder must be filled with liquid paraffin by hand, or it can be
filled with paraffin particles. The estimated time for melting the paraffin is
approximately 12-18 hours, depending on the paraffin melting point used and
the set paraffin melting temperature.

The paraffin bath has the most two liquid level scale lines, which are the
paraffin liquid level required to process the first and second baskets of
samples. According to the number of samples to be processed, fill paraffin to
the corresponding scale line.
Pay attention to the paraffin case door hinge. Do not place your fingers in the position
shown by the figure above
(Figure 17-3)
.
Do not force the paraffin cylinder to be removed when the instrument is in a cold state.
Such operation can cause damage to the instrument.
Pull out the paraffin cylinder slowly and carefully. Do not yank it. The internal liquid
paraffin is very hot, and will cause burns. The surface, handle and lid of the paraffin
cylinder are also very hot. Therefore, be sure to wear PPE clothing and operate with
caution.
4.3.9 Waste Paraffin Collection Tray

The waste paraffin collection tray (Figure 18-1) is located at the lower right of
Figure 17