DAKEWE HP300 Plus, User Manual

Page: 13 / 107

Dakewe (Shenzhen) Medical Equipment Co., Ltd 9

Always observe the safety and precautions described in this Chapter.

Even if you are already familiar with the operation and use of other Dakewe
products, be sure to read these instructions.

Do not remove or modify the protective devices of the instrument and accessories.
Only Dakewe-certified qualified maintenance personnel can repair the instrument
and dispose of the instrument’s internal components.

The instrument is designed and manufactured with advanced technology and
complies with relevant safety technical standards and specifications. Improper
instrument operation or handling can result in injury to the user or other personnel,
damage to the instrument and other property damage. The instrument must be
used for its intended use and only when all safety functions are in proper working
condition. Faults that are detrimental to safety must be corrected immediately.

Only use original spare parts and permitted original accessories.
Do not remove or modify protective devices of the instrument and accessories. Only
authorized maintenance personnel are allowed to repair the instrument and dispose of the
instrument’s internal components.
2.2 Warning
The safety device installed by the manufacturer on this instrument only constitutes the
basis of accident prevention. The primary responsible party for the safe operation is the
organization, followed by the personnel assigned by the organization to operate, maintain or
repair the instrument. In order to ensure the smooth operation of the instrument, be sure to
observe the following instructions and warnings.
2.2.1 Warning - Signs on the instrument
The warning triangle is displayed on the instrument to ensure that correct operating
instructions defined in this Manual must be observed during operation and replacement.
Failure to follow these instructions may result in accidents, personal injuries, and
damages to the instrument or accessories.
The surface of the instrument that will become hot during operation is marked with this
warning label. Touching the surface marked on this warning label may cause burns.