www.daisalux.com
17
LPS24
– USER MANUAL
6.3.5. Input 0…10V
The device has an input that enables brightness control (dimming) of one or more
outputs configured as “
beacons
”. With this feature, the brightness of each circuit
configured as “
beacons
” can be changed between 10
-90% of the nominal.
The dimming can be performed through the display by selecting the percentage desired
by circuit or by this 0..10V input, which is controlled by an analogue signal from 0 to 10V
or potentiometer (30KΩ), the latter is not linear.
Regulation by analogue signal
Regulation by potentiometer
6.3.6. Remote control (TELEM)
The device has a remote input for connecting a Daisalux remote control. This input
provides a remote control for the device so that it can be restarted when in standby or
set to standby when there is a power failure at its input.
