Tc point
Components
UL certified 18 AWG (0.82 mm
2
) supply wire or
approved equivalent
UL certified 22-14 AWG (0.33-2.08 mm
2
) twist-on
wire connectors or 18-14 AWG (0.82-2.82 mm
2
)
inline/IDC connectors or approved equivalent
Flexible Tape End Cap
Tetra
®
12 Volt Power Supply
Tetra
®
LED Tape Gen 2
Tetra
®
Flexible Tape Lead Connector (GETPLCN54-1)
Notices
D>=19mm (0.75”)
D>=19mm (0.75”)
Save These Instructions
Use only in the manner intended by the manufacturer. If
you have any questions, contact the manufacturer.
RETROFIT SIGN CONVERSION LED KIT FOR USE ONLY
IN ACCORDANCE WITH KIT INSTRUCTIONS.
KIT IS COMPLETE ONLY WHEN ALL PARTS REQUIRED
BY THE INSTRUCTIONS ARE PRESENT.
TROUSSE DE CONVERSION À DEL POUR LA
MODERNISATION DES ENSEIGNES
À UTILISER CONFORMÉMENT AU GUIDE D’INSTALLATION.
Prepare Electrical Wiring
Electrical Requirements
• Limited to use in dry and damp locations. Water exclusion
must be determined in the end product.
• The grounding and bonding of the LED Driver shall be done in
accordance with National Electric Code (NEC) Article 600.
• Follow all National Electric Codes (NEC) and local codes.
• These products are only suitable for connection to a circuit
from a Class 2 power source.
• These products have not been evaluated for use when
connected to a power source that does not comply with Class
2 voltage and energy limited supplies.
FOR UL ONLY
Tetra
®
Flexible Tape Jump Connector (GETPJCN54-1)
Scissors
Electrical grade RTV silicone.
Example electrical grade RTV silicones include:
• Momentive RTV 6700 Series Silicone Rubber Adhesive Sealant
• Momentive White Blanc RTV 162 Silicone Rubber Adhesive Sealant-
Electrical Grade
• Dow Corning 3140 - Non-Corrosive Flowable (clear)
• Dow Corning 3145 - Non-Corrosive Nonflowable (clear or gray)
• Dow Corning RTV 748 Non-Corrosive Sealant-White
2
2
1
1
3
3
4
7
7
4
5
8
8
5
6
9
9
6
Tetra
®
LED Tape Gen 2
Installation Guide
2