GETP35-2, GETP40-2, GETP50-2, GETP60-2,
GETPH35-2, GETPH40-2, GETPH50-2, GETPH60-2,
GETPRD-2, GETPGL-2, GETPBL-2
12
12
Volt
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING
RISK OF ELECTRIC SHOCK
∙
Turn power off before inspection, installation or removal.
∙
Properly ground power supply enclosure.
RISK OF FIRE
∙
Use only suitably approved wire for input/output connections. Minimum size 18 AWG (0.82mm
2
)
∙
Follow all local codes.
∙
Not to be submerged or used in a marine environment.
UL WARNING
RISK OF FIRE OR ELECTRIC SHOCK
∙
LED Retrofit Kit installation requires knowledge of sign electrical systems. If not qualified, do not attempt installation. Contact a qualified
electrician.
∙
Install this kit only in host signs that have been identified in the installation instructions and where the input rating of the retrofit kit does not exceed the
input rating of the sign.
∙
Installation of this LED retrofit kit may involve drilling or punching of holes into the structure of the sign. Check for enclosed wiring and
components to avoid damage to wiring and electrical parts.
∙
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
Install Instruction Guide
Einbauanleitung
Asennusohje
Guida all’installazione
Monteringsanvisning
Guia de Instalação
Monteringsvejledning
Guía de instalación
Guide d’installation
Installatiehandleiding
Instrukcja instalacji
Montaj Kılavuzu
Telepítési útmutató
Montavimo gidas
Installationshandledning
EN
DE
FI
IT
NO
DA
ES
FR
NL
PL
TR
HU
LT
SW
PT
Tetra
®
LED Tape Gen 2
LED Lighting System
Installation Guide
SIGN252 | A-1012632