SiUS12-928_B
CTXS-L, FTXS-L Series
Operation Manual
96
16
Display
NOTE
90˚
55˚
23ft
(7m)
55˚
23ft (7m)
Page 20
CAUTION
To start operation
Press and select the desired mode.
• Each time the is pressed a different setting option is displayed on the LCD.
• The INTELLIGENT EYE lamp lights green.
• By selecting “ ” from the following icons, the air conditioner will be in COMFORT
AIRFLOW operation combined with INTELLIGENT EYE operation.
COMFORT
AIRFLOW
INTELLIGENT
EYE
Combination
No Setting
blank
• When the louvers (horizontal blades) are swinging, the operating as above will stop
movement of them.
• The lamp will be lit while human movements are detected.
To cancel operation
Press and select “blank” on the LCD.
• The INTELLIGENT EYE lamp goes off.
Notes on COMFORT AIRFLOW operation
• The louver position will change, preventing air from blowing directly on the occupants of the room.
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• The airflow rate will be set to AUTO. If the upper and lower airflow direction is selected, the COMFORT AIRFLOW function will be canceled.
Notes on INTELLIGENT EYE operation
• Application range is as follows.
Vertical angle 90˚
(Side view)
Horizontal
angle 110˚
(Top view)
• Sensor may not detect moving objects further than 23ft (7m) away. (Check the application range)
• Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, fluttering curtains and light reflected off of mirrors as passersby.
• INTELLIGENT EYE operation will not go on during POWERFUL operation.
• NIGHT SET mode will not go on during use of INTELLIGENT EYE operation.
Notes on combination of COMFORT AIRFLOW operation and INTELLIGENT EYE operation
• The airflow rate will be set to AUTO. If the upper and lower airflow direction is selected, the COMFORT AIRFLOW operation will be canceled.
Priority is given to the function of whichever button is pressed last.
• Do not place large objects near the sensor.
Also keep heating units or humidifiers outside the sensor’s detection area. This sensor can detect undesirable objects.
• Do not hit or forcefully push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
