Daikin Split Comfora R32 Service Manual Download Page 77

Page: 77 / 164

Components

Service manual

ATXP20~35 + FTXP20~71 + ARXP20~35 + RXP20~71
Split Comfora R32
ESIE18-01C – 2020.07

HAP LED

Does the HAP LED blink in regular
intervals (1 second ON/1 second OFF)?

Action

Yes

Return to

"2.8.1 Checking

procedures"

[

75] of the main PCB and

continue with the next procedure.

Replace the main PCB, see

To check if the correct spare part is installed

Prerequisite:

First perform all earlier main PCB checks, see

Visit your local spare parts webbank.

Enter the model name of your unit and check if the installed spare part
number corresponds with the spare part number indicated in the webbank.

NOTICE

Also check that the correct spare part is installed for the capacity adapter.

Is the correct spare part for the PCB
installed?

Action

Yes

Return to

"2.8.1 Checking

procedures"

[

75] of the main PCB and

continue with the next procedure.

Replace the main PCB, see

To check the wiring of the main PCB

Prerequisite:

First perform all earlier main PCB checks, see

Prerequisite:

Stop the unit operation via the user interface.

Prerequisite:

Turn OFF the respective circuit breaker.

Check that all wires are properly connected and that all connectors are fully
plugged‑in.

Check that no connectors or wires are damaged.

Check that the wiring corresponds with the wiring diagram, see

INFORMATION

Correct the wiring as needed.

Is the problem solved?

Action

Yes

No further actions required.

Return to

continue with the next procedure.

Summary of Contents for Split Comfora R32




































































































































































Search results

Summary of Contents for Split Comfora R32

Reviews:

Brands by name

Popular brands

Daikin Split Comfora R32, Service Manual

Search results

Summary of Contents for Split Comfora R32

Reviews:

Brands by name

Popular brands