Operating instructions
6
Daikin RoCon
Daikin Control unit
008.1543999_00 – 03/2017 – EN
1
x
General safety precautions
Handling instructions
●
Handling instructions are shown as a list.
Actions for which the sequential order must be
maintained are numbered.
1.2 Safety instructions for installation and
operation
1.2.1 General
●
For any work on the equipment, which
extends above and beyond the operation of
the regulating system, you must observe the
details provided in the supplementary
documents, particularly with regard to safety
instructions.
Avoiding danger
Alls Daikin heat generators conform to the state-
of-the-art and meets all recognised technical
requirements. However, improper use may result
in serious physical injuries or death, as well as
property damage.
To avoid danger, only operate the Daikin heat
generator:
– as stipulated and in perfect condition,
– with an awareness of safety and the hazards
involved.
This assumes knowledge and use of the con-
tents of this manual, of all applicable documents,
of the relevant accident prevention regulations
as well as the recognised safety-related and oc-
cupational health rules.
1.2.2 Use as intended
The RoCon BF control unit must only be used in
Daikin oil and gas fired heating units that are re-
leased for the Daikin RoCon control system. The
Daikin RoCon BF control unit must only be op-
erated in accordance with the specifications of
this manual.
Any other use outside the intended use is con-
sidered as improper. The operator alone shall
bear responsibility for any resulting damage.
Results of actions are identified with an
arrow.
Entry into a setting procedure
Exit from a setting procedure
