User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
259
Failure to turn off and setpoint gap times are sampled per period.
* 1 period ... 15 minutes obtained by dividing 1 hour by 4.
Example:
3:00
3:15
3:30
3:45
4:00
1 period
1 period
1 period
1 period
•
Failure to turn off time
The equipment has been in operation the whole period though according to the
operation rule, it should be stopped.
•
Setpoint gap time
The equipment has been in operation the whole period and the energy gap between the
average setpoint (actual value) and setpoint (operation rule) is positive.
However, if the operation during the period is due to multiple operation modes, sampling
is not performed.
NOTE
Touch the Equipment op. Mgmt. button on the Energy Navigator tab of the Menu List screen and
display the Equipment operation management screen. (See page 57.)
Failure to turn off Tab (Equipment operation management Screen)
(91)
(92)
(93)
(94)
(95)
(97)
(96)
(90)
The sampling period is displayed in
(90)
. It runs from 15 days before to the current day.
Set the Data target in
(91)
. Touching the Modify button displays the list of areas registered with
the system in the Data Target Setup screen. Select the targets from the screen and touch the OK
button to save.
In the
Oper. Rule
combo box
(92)
, select an operation rule from those registered and touch the
Sampling
button
(93)
.
Summary of Contents for Intelligent Touch Manager DCM601A71
Page 309: ...EM11A017 1208 HT...
