30
ENG
pRack PR300T +0300018EN rel. 1.5 - 02.05.2017
Menu screen
An example of a menu screen is shown in the fi gure below:
Main menu 5/9=
D.Condensers
E.Other functions
F.Settings
Fig. 5.b
The top right corner shows the selected item and the current password
level (for details see the following paragraph). The
and
buttons
are used to select the desired menu item, while
accesses the selected
item.
Screen for displaying/setting the parameters
An example of a screen for displaying/setting the parameters is shown in
the fi gure, also highlighting the fi elds and icons used:
L1-AI Status Bab01
Suction press.probe
PLB1 B1 4-20mA
24.39barg
Upper value:
Lower value:
Calibration:
44.8barg
0.0barg
0.0barg
1
3
2
Fig. 5.c
1
Menu branch identifi er
2
Screen identifi er
3
Parameter
The screen identifi er uniquely identifi es the menu branch and the
screen: the fi rst characters indicate the menu branch, while the last two
alphanumeric digits identify the order of the screen inside the menu, for
example screen Bab01 is the fi rst screen in menu B.a.b.
Note
: The information on the screens may vary according to the
password level used to access the menu.
5.3 Password
pRack PR300T manages three levels of password:
•
User
•
Maintenance
•
Manufacturer
Each level includes the same rights as the lower levels, that is, the
Manufacturer can access all the screens and parameters, the Maintenance
can access the screens and parameters available in the Maintenance and
User levels, while the User can only access the screens and parameters
available in the User level.
Note
: All levels display the main screens and the other information
screens.
When pressing
a prompt is shown to enter the password, which
remains active for 5 minutes after the last button is pressed.
The menu screens show their own password level using an icon at the
top right:
1 line: user, 2 lines: maintenance, 3 lines: manufacturer.
The password level can be changed from menu branch F.c. at any time.
The password can also be changed in the corresponding menu branch.
Page 79 of 172
Copyright HPL March 2021
P4114S Rev 03
Summary of Contents for Hubbard GCU2040PXB1
Page 4: ...Page 4 of 172 Copyright HPL March 2021 P4114S Rev 03...
Page 49: ...6 Carel PR300T CO2 Controller manual Page 49 of 172 Copyright HPL March 2021 P4114S Rev 03...
Page 144: ...Page 144 of 172 Copyright HPL March 2021 P4114S Rev 03...
Page 165: ...9 Commissioning Form Page 165 of 172 Copyright HPL March 2021 P4114S Rev 03...
