Daikin GQI-Eco Series, Service Manual

Page: 97 / 215

ESIE15-13B Field Setting from Outdoor Unit PCB
Field Setting 83
3.2.3 Setting Mode 2
In this mode, settings for the following items can be made.
Press the MODE (BS1) button for 5
seconds and set to “Setting mode 2”.
Press the SET (BS2) button and set the
LED display to a setting item (
∗
1).
↓
Press the RETURN (BS3) button and
decide the item.
<Selection of setting items>
<Selection of setting conditions>
Press the SET (BS2) button and set to
the setting condition you want.
↓
Press the RETURN (BS3) button and
decide the condition.
Press the RETURN (BS3) button and
set to the initial status of “Setting mode
2”.
∗
If you become unsure of how to proceed, push the MODE (BS1) button and return to setting mode 1.
h
: OFF
k
: ON
No.
Display of setting items Display of setting conditions
Setting items
LED display
Setting condition
LED Display
H1P H2P H3P H4P H5P H6P H7P H1P H2P H3P H4P H5P H6P H7P
3 Demand 2 operation
bck h h h h bck bck
30% Demand
k h h h k h h
40% Demand (factory set)
k h h h h k h
50% Demand k h h h h h k
7
Reduced airflow (set to
low noise level 1)
bck h h h bck bck bck
OFF
k h h h h h h
ON
k h h h h h k
11 TeS Lower limit value bck h h bck h bck bck
0°C k h h h h h k
2°C (factory set)
k h h h h k h
4°C k h h h h k k
6°C
k h h h k h h
28 Refrigerant recovery
mode
k h k k k h h
OFF (factory setting)
k h h h h h k
ON k h h h h k h
33 TeS Lower limit value
k k h h h h k
0°C (factory set)
k h h h h h k
6°C
k h h h h k h
9°C k h h h h k k
11°C
k h h h k h h
13°C k h h h k h k
15°C
k h h h k k h
17°C
k h h h k k k
Weather depending control
in cooling
k h h k h h h
34 TcS Upper limit value k k h h h k h
60°C
k h h h h h k
50°C
k h h h h k h
47°C
k h h h h k k
45°C
k h h h k h h
43°C
k h h h k h k
Weather depending control
in heating
k h h h k k h