ESIE15-13B
Wired Remote Controller
Remote Controller
11
10.DAY OF THE WEEK INDICATOR
The day of the week indicator shows the current week day (or the set day when reading or
programming the schedule timer).
11.CLOCK DISPLAY
The clock display indicates the current time (or the action time when reading or
programming the schedule timer).
12.MAXIMUM SET TEMPERATURE
The maximum set temperature indicates the maximum set temperature when in limit
operation.
13.MINIMUM SET TEMPERATURE
The minimum set temperature indicates the minimum set temperature when in limit
operation.
14.SCHEDULE TIMER ICON
This icon indicates that the schedule timer is enabled.
15.ACTION ICONS
These icons indicate the actions for each day of the schedule timer.
16.OFF ICON
This icon indicates that the OFF action is selected when programming the schedule timer.
17.INSPECTION REQUIRED
and
These icons indicate that inspection is required. Consult your installer.
18.SET TEMPERATURE DISPLAY
This indicates the current set temperature of the installation (not shown in LIMIT operation or
in FAN or DRY mode).
19.SETTING
Not used, for service purposes only.
20.AIRFLOW DIRECTION ICON
This icon indicates the airflow direction (only for installations with motorised airflow flaps).
21.NOT AVAILABLE
is displayed whenever a non-installed option is addressed or a function is not
available.
22.FAN SPEED ICON
This icon indicates the set fan speed.
23.DEFROST/HOTSTART MODE ICON
This icon indicates that the defrost/hotstart mode is active.
24.AIR FILTER CLEANING TIME ICON
This icon indicates the air filter must be cleaned. Refer to the manual of the indoor unit.
25.ELEMENT CLEANING TIME ICON
This icon indicates the element must be cleaned (HRV only).
26.VENTILATION MODE BUTTON
The ventilation mode button operates the HRV; refer to the manual for more details.
27.VENTILATION AMOUNT BUTTON
This button sets the ventilation amount; refer to the manual for more details.
28.INSPECTION/TEST OPERATION BUTTON
Not used, for service purposes only.
29.PROGRAMMING BUTTON
This button is a multi-purpose button.
Depending on the previous manipulations of the user, the programming button can have
various functions.
30.SCHEDULE TIMER BUTTON
This button enables or disables the schedule timer.
31.TIME ADJUST BUTTON
These buttons are used to adjust the clock or, when in programming mode, to adjust the
programmed action time. Both buttons have an auto-repeat function.
32.TEMPERATURE ADJUST BUTTONS
These buttons are used to adjust the current setpoint or, when in programming mode, to
adjust the programmed setpoint temperature (step = 1°C). Both buttons are also used to
adjust the day of the week.
33.OPERATION CHANGE/MIN-MAX BUTTON
This button is a multi-purpose button. Depending on the previous manipulations of the user,
it can have following functions:
1 select the operation mode of the installation (FAN, DRY, AUTOMATIC, COOLING,
HEATING)
2 toggle between minimum temperature and maximum temperature when in limit operation
34.SETPOINT/LIMIT BUTTON
This button toggles between setpoint, limit operation or OFF (programming mode only).
Summary of Contents for GQI-Eco Series
