5
x
Parameter Overview
Daikin RoCon HP
Daikin Controller
008.1420844_13 – 02/2016
Operating instructions
37
5
Parameter Overview
5.1
For first commissioning or resetting to factory settings
The parameters listed in this section can be accessed
when the Daikin Altherma EHS(X/H) is commissioned
for the first time or if it is fully reset.
During initial commissioning:
After resetting to factory settings:
●
Rotary switch setting: Info
●
Resetting to factory settings.
(see chapter 3.6.12 - Possibility 3)
●
Rotary switch setting: Info
●
Turn power supply to Daikin Altherma EHS(X/H) on.
Language
Use
Standard Config
Yes
No
Basic Configuration
Boiler Function
Unmixed Circ Config
BUS ID HS
Time Master
System Config
Tab. 5-1 Parameter "Basic Configuration"
