Daikin EBLA04E2V3, Installer'S Reference Manual

Page: 200 / 284

11 | Configuration
Installer reference guide
200
EBLA04~E23V3 + EDLA04~E23V3
Daikin Altherma 3 M
4P685228-1A – 2022.05
INFORMATION
The auto emergency setting can be set in the menu structure of the user interface
only.
INFORMATION
If a heat pump failure occurs and Emergency is set to Manual , the room frost
protection function, the underfloor heating screed dryout function, and the water
pipe antifreeze function will remain active even if the user does NOT confirm
emergency operation.
Compressor forced off
Compressor forced off mode can be activated to only allow the backup
heater to provide domestic hot water and space heating. When this mode is
activated:
▪ Heat pump operation is NOT possible
▪ Cooling is NOT possible
# Code Description
[9.5.2] [7-06] Activation of the Compressor forced off
mode:
▪ 0: disabled
▪ 1: enabled
Glycol filled system
Glycol Filled system
This setting gives the installer the possibility to indicate whether the system is filled
with glycol or water. This is important in case glycol is used to protect the water
circuit against freezing. If NOT set correctly, the liquid in the piping can freeze.
# Code Description
N/A [E-0D] Glycol Filled system : Is the system filled
with glycol?
▪ 0: No
▪ 1: Yes
NOTICE
If you add glycol to the water, you also need to install a flow switch (EKFLSW2).
Balancing
Priorities
For systems with a separate domestic hot water tank.