26
Select
Setting > PTZ > Function > Scan
.
Step 1
The
Scan
interface is displayed. See Figure 3-17.
The scan interface
Figure 3-17
Configure scan.
Step 2
1)
Select a
Scan No.
and set its
Speed
.
2)
Click
Setup
.
Buttons of
Set Left Limit
and
Set Right Limit
are displayed.
3)
Operate the PTZ control panel and move the camera to a left border you want and click
Set Left Limit
; move the camera to a right border you want and click
Set Right Limit
.
Select a
Scan No.
and click
Start
to start scan.
Step 3
Click
Stop
to stop the scan.
3.2.2.2.4
Configuring Pattern
The function of "pattern" can record continuously the user’s manual operation to the PTZ and record
the moving tracking of the camera’s lens. The camera will make the location where the recording
begins as the beginning point, and move back and forward automatically following the preset
movement pattern.
Select
Setting > PTZ > Function > Pattern
.
Step 1
The
Pattern
interface is displayed. See Figure 3-18.
