27
The pattern interface
Figure 3-18
Configure pattern.
Step 2
1)
Select a
Pattern No
.
2)
Click
Setup
.
Buttons of
Start Rec
and
Stop Rec
are displayed.
3)
Click
Start Rec
.
4)
Operate the PTZ control panel and adjust you camera’s direction, zoom and focus.
5)
Click
Stop Rec
.
Select a
Pattern No
. and click
Start
to start pattern.
Step 3
Click
Stop
to stop the pattern.
3.2.2.2.5
Configuring Pan
Pan function makes your camera rotate horizontally at a speed. When you do not have enough
cameras to cooperate for a wide view (a 360° view of a square, for example) or you want to learn the
general situation of an area with only one camera, use the Camera pan function.
Select
Setting > PTZ > Function > Pan
.
Step 1
The
Pan
interface is displayed. See Figure 3-19.
The pan interface
Figure 3-19
Set a
Pan Speed
. Click
Start
to start pan.
Step 2
