19
Mind the distance during laser ranging. Less than 50 m will result in a damaged laser.
Click Start Ranging, and the camera starts to measure the distance from itself to the object in the
middle of the image (as indicated with the red cross sign).
PTZ
3.2
3.2.1
Bullet Cameras
PTZ setting of bullet camera is used for controlling external PTZ Camera. Connect the Camera to
external PTZ through RS-485 port before using this function.
3.2.1.1
Configuring Protocol
If you want to control the external PTZ by your bullet camera, you need to set the PTZ protocol first
and then connect PTZ to your camera.
Select
Setting > System Management > PTZ Setting
.
Step 1
The
PTZ Settings
interface is displayed. See Figure 3-8.
PTZ settings
Figure 3-8
Configure PTZ parameters. See Table 3-5.
Step 2
Table 3-5
Parameter description
Parameter Description
Protocol
Matches with the PTZ protocol.
Address
Enter the corresponding Camera address.
The entered address must be the same with the address configured on the PTZ;
otherwise the PTZ cannot be controlled from the bullet camera.
Baud rate
Configure Camera baud rate.
Data bit
The default is "8".
Stop bit
The default is "1".
Parity
The default is "none".
