146
When accessing through WAN, you can only use MAC of your router to limit MAC verification.
You cannot enable white list and black list at the same time.
You cannot add your Camera IP/MAC to the white list.
Select
Setting > System > Safety > IP Filter
.
Step 1
The
IP Filter
interface is displayed. See Figure 4-101.
IP filter
Figure 4-101
Select the check box of
Enable
.
Step 2
Add an IP/Mac address to the white list.
1)
Click the
Trusted Sites
tab.
The
Trusted Sites
interface is displayed.
2)
Click
Add IP/MAC
.
The dialogue box of
Add IP/MAC
is displayed.
3)
Set IP/MAC address. See Table 4-50.
Table 4-50
IP/MAC address parameters description (trusted sites)
Parameter
Description
IP address
IP address you are going to authorize.
IP segment
Start address and end address of the IP segment.
MAC address
MAC address you are going to authorize.
4)
Click
Save
.
Add an IP/Mac address to the black list.
1)
Click the
Banned List
tab.
The
Banned List
interface is displayed.
2)
Click
Add IP/MAC
.
The dialogue box of
Add IP/MAC
is displayed.
3)
Set IP/MAC address. See Table 4-51.
Table 4-51
IP/MAC address parameters description (banned list)
Parameter
Description
IP address
IP address you are going to prohibit.
IP segment
Start address and end address of the IP segment.
MAC address
MAC address you are going to prohibit.
4)
Click
Save
.
Click
Save
.
Step 3
4.8.4.3
Configuring System Service
You can set functions such as SSH, password reset, CGI service, Onvif service, genetec service, audio
and video transmission encryption and mobile push.
