29
The idle motion interface
Figure 3-21
Configure idle motion.
Step 2
1)
Select the
Enable
check box to enable this function.
2)
Select an idle motion and set idle time.
After you have set a value of idle time, when the time when you do not operate the PTZ
is longer than that value, the idle motion will be implemented immediately.
3)
Click
Save
.
3.2.2.2.8
Configuring Power Up
If you want the PTZ to implement certain actions after the camera is powered, configure this
function.
Select
Setting > PTZ > Function > Power Up
.
Step 1
The
Power Up
interface is displayed. See Figure 3-22.
