136
Table 4-44
FTP parameter description
Parameters
Description
Server Address
The IP address of the SFTP or FTP server.
Port
The port of the SFTP or FTP server.
User name
The user name to log in the server.
Password
The password to log in the server.
Remote Directory
The destination path in the server.
Emergency (Local)
Select the
Emergency (Local)
check box, and when the FTP server does
not work, all the files are saved to the internal SD card.
Click
Save
.
Step 4
Click
Test
to check whether the server has been properly connected.
4.7.2.4
Configuring NAS Server
This function can be enabled only when NAS has been selected as destination path. Select
NAS
interface and you can save files in NAS server.
Select
Setting > Storage > Destination > NAS
.
Step 1
The
NAS
interface is displayed. See Figure 4-85.
NAS settings
Figure 4-85
Select the
Enable
check box.
Step 2
Configure NAS parameters. See Table 4-45.
Step 3
Table 4-45
NAS parameters
Parameter
Description
Server Address
The IP address of the NAS server.
Remote Directory
The destination path in the NAS server.
Click
Save
.
Step 4
4.7.3
Configuring Record Control Parameters
This chapter introduces configurations including pack duration, pre-event record, disk full, record
mode and record stream.
Select
Setting > Storage > Record Control
.
Step 1
The
Record Control
interface is displayed. See Figure 4-86.
