24
3.2.2.2
Configuring PTZ Functions
Select
Setting > PTZ > Function
and the
Function
interface is displayed.
It’s set by default that the thermal image is displayed. In the thermal image, you can click
to
switch the image to visible image. And, in the visible image, you can click
to switch the image
to thermal image.
3.2.2.2.1
Configuring Preset
By configuring presets, the camera can store parameters such as PTZ’s horizontal angle, inclination
angle, and the lens focal length under the current situation to the Camera. If you need those
parameters later, you can quickly adopt them and adjust the PTZ and camera to those locations.
Select
Setting > PTZ > Function
.
Step 1
The
Preset
interface is displayed. See Figure 3-15.
The preset interface
Figure 3-15
Configure preset.
Step 2
1)
Click
Add
to add a new preset.
2)
Operate the PTZ control panel to move the camera lens to a specific direction you need.
3)
Double-click the preset’s
Number
to modify it.
4)
Double-click the preset’s
Preset Title
to modify it. Then click
.
Click
to delete a preset that is wrongly configured or that is not
needed anymore.
Click
Delete
to delete all the presets you have added.
