95
Parameter
Function
SNMP Version
Check SNMP v1, device only process v1 info.
Check SNMP v2, device only process v2 info.
Check SNMP v3, can set username, password and
encryption method. Server calibrate corresponding
username, password and encryption method too access
device and v1/v2 are unavailable.
SNMP port
The listening port of the proxy program of the device. It is a
UDP port not a TCP port. The value ranges from 1 to 65535.
The default value is 161
Community
It is a string, as command between management and proxy, ,
defining
a proxy, and a manager’s authentication.
Read community
Read-only access to all SNMP targets, default is public.
Note: Only number, letter, _, and
– supported.
Write community
Read/write access to all SNMP targets, default is private.
Note: Only number, letter, _, and
– supported.
Trap address
The destination address of the Trap information from the
proxy program of the device.
Trap
SNMP trap is a proxy message sent to admin as important
event notice or status change.
Trap Address
Address where to send Trap message.
Trap Port
Port which send Trap message, default is 162, range
1~65535.
Read-only
username
It is public by default.
Note:
The name can only be made up by number, letter and
underline.
Read/write
username
It is private by default.
Note:
The name can only be made up by number, letter and
underline.
Authentication
Type
It can select MD5 or SHA, it is MD5 by default.
Authentication
Password
The password length is no less than 8 characters.
Encryption Type
It is CBC-DES by default.
Encryption
Password
The password length is no less than 8 characters.
Sheet 6-23
Summary of Contents for DH-TPC-PT8320A
