Dahua DH-TPC-PT8320A, Operation Manual

Page: 85 / 172

80
Step 2
It is to configure the parameter of TCP/IP, please refer to sheet 6-16 for more details.
Parameter Function
Host Name It is to set the name of current host device. It supports max 15
characters.
Ethernet Card Please select the Ethernet card to be configured. Default is
wired.
Note:
You can modify the default Ethernet card if there is more than
one card. It needs to reboot the device to activate the new
setup once you modify the default setup.
Mode There are two modes: static mode and the DHCP mode. Select
DHCP mode, it will auto search IP, and at this moment you
cannot set IP/subnet mask/gateway; Select static mode, you
need to manually set IP/subnet mask/gateway.
Mac Address It is to display Mac address of the device.
IP Version It is to select IP version. IPV4 or IPV6. Currently both of IP
addressed are supported, and you have access to them.
IP Address Input corresponding numbers to modify IP address.
Subnet Mask It is to set according to actual situation, the prefix of subnet is
number, input 1~255, the prefix of subnet identifies a specific
network link; generally it includes a layering structure.
Note:
The device will make legal inspection to all the IPv6 addresses,
make sure the IP address and default gateway have to be in
the same segment, which means the field of specific length of
subnet prefix has to be the same to pass inspection.
Default Gateway It is to set according to actual situation, make
sure it is in the same segment with IP
address.
Note:
There is no
default gateway
for IPv6
version. For
preferred DNS
and alternate
DNS, input 128
bit, it can
’t be
null.
Preferred DNS
Server DNS server IP address.
Alternate DNS
Server Alternate IP address of DNS server