Dahua DH-TPC-PT8320A, Operation Manual

Page: 112 / 172

107
Step 6
It is to set parameters, please refer to sheet 6-30 for more details.
Parameter Note
Working
Period It is to set working period and enable alarm within the time range which has been
set, please refer to
“Working Period Setup” for more details.
Direction It is to select tripwire direction, you can select A->B
、
B->A
、
A<->B
Alarm Track
Select
“
Alarm Track
”
and it will auto track when there is human or object triggering
intelligent rules.
Note:
Please select track mode before using the function, please refer to
“
6.4.1.4
Intelligent Track
”
for more details.
Track Time It means the time of auto track after track is enabled when alarm is triggered.
Record
The system will auto record when motion detection alarm occurs.
Note:

Please refer to
“
6.1.2.5 Storage path
”
for storage location query and setting of
record file.

The system record needs to meet the two following conditions when motion
detection alarm occurs:

Motion detection has been enabled, please refer to
“
6.7.1.2 Record Plan
’
for
more details.

Auto record has been set, please refer to
“
6.7.3 record Control
”
for more
details.
Record Delay It can continue to record a period of time after motion detection alarm is over.
Relay-out
Connect alarm devices to relay-out port (such as light, alarm whistle and so on), the
system will transmit alarm info to alarm devices when motion detection alarm
happens.
Alarm Delay It can continue to alarm for a period of time after motion detection alarm is over.
Send Email
It will send email to designated mailbox to remind alarm when motion detection
alarm happens.
Note:
Email can be successfully sent after setting Email, please refer to
“6.2.6 SMPT (E-
mail)
” for more details.