Dahua DH-TPC-PT8320A, Operation Manual

Page: 108 / 172

103
Parameter Note
Mode
It is to set fan mode, you can select auto and manual.
In manual mode, it needs to select “Enable” to enable fan.
Sheet 6-28
Step 3
Click
“Save” to make config valid.
6.3.4 Heater
Step 1
Select
“Setup > Peripheral > Heater” in the system menu and the system will display the interface of
“Heater”, which is shown in Figure 6-44.
Figure 6-44
Step 2
It is to configure parameters, please refer to sheet 6-29 for more details.
Parameter Note
Mode
The mode includes auto and manual.
 When it is in auto mode, it needs to set “Start Temp” and “Stop
Temp”.
 When it is on auto mode, it needs to select “Enable” to enable
heater.
Sheet 6-29
Step 3
Click
“Save” to save the config.
6.4 Smart Thermal
Note:

Different devices may have different functions, please refer to the actual interface for more details.

It is mutually exclusive among IVS, face detection and fire warning of visual.