84
Figure 6-25
Step 2
Set
“Authentication” as “Enable”.
Step 3
Click
“Save” to make config valid.
6.2.3 PPPoE
It is to build network connection via enabling PPPoE (Point-to-Point Protocol over Ethernet) dial mode;
the device will acquire a dynamic IP address of WAN. Please acquire PPPoE user name and password
provided by ISP (Internet service provider) before operation.
Step 1
Select
“Setup > Network > PPPoE” and the system will display the interface of “PPPoE”, which is shown in
Figure 6-26.
Figure 6-26
Step 2
Select
“Enable”, input PPPoE user name and password.
Step 3
Click
“Save” to make config valid.
The system will prompt that it is successfully saved and realtime display the acquired IP address of
public network, which is shown in Figure 6-27. Users can get access to device via the IP address.
Summary of Contents for DH-TPC-PT8320A
