Web Configuration 85
IP conflict
Figure 6-100
Traffic light fault
Figure 6-101
Illegal access
Figure 6-102
Device attitude error
Figure 6-103
Check
Enable
and
Relay-out
for each abnormality event as needed.
Step 2
Configure the parameters. See Table 6-33.
Step 3
Table 6-33 Parameters of abnormality events
Parameter
Description
Enable
Check to enable corresponding abnormality event.
Relay-out
Check to enable the corresponding alarm output of abnormality event,
and select the corresponding port.
Signal Duration
The alarm linkage keeps running for the set time after alarm ends.
The time range is 10s
–300s.