Dahua Technology DHI-ITC352-RF2D User Manual Download

Page: 115 / 124

Web Configuration 108

Auto maintain

Figure 6-137

Select reboot mode and configure the parameters. See Table 6-41.

Step 2

Table 6-41 Auto maintain parameters

Parameter

Description

Auto Reboot

Check

Auto Reboot

, and configure the day and time.

The system will automatically reboot at the set day and time.

Auto Delete Old File

Check

Auto Delete Old File

, and the system will automatically

delete the old files.

Manual Reboot

Click to manually reboot the Camera.

Click

to save the configuration. Click

Refresh

to refresh the interface.

Step 3

6.5.7.7 Upgrade

Import the update file in the format of .bin to the system, and then update the system.

Select

Setting > System > Upgrade

. The

Upgrade

interface is displayed. See Figure 6-138.

Click

Browse

to select the update file, and then click

Upgrade

to update the system.

Do not disconnect the power or network, or reboot or shutdown the Camera during update.

Incorrect update programs might result in the Camera unable to work.

Upgrade

Figure 6-138

6.5.8 Information

You can check information such as version, log, online user and work state.

Summary of Contents for DHI-ITC352-RF2D





























































































































Search results

Summary of Contents for DHI-ITC352-RF2D

Reviews:

Related manuals for DHI-ITC352-RF2D

Brands by name

Popular brands

Dahua Technology DHI-ITC352-RF2D, User Manual

Search results

Summary of Contents for DHI-ITC352-RF2D

Reviews:

Related manuals for DHI-ITC352-RF2D

Brands by name

Popular brands