Web Configuration 83
Parameter
Description
Click
Setting
, and the
Period
interface is displayed. See Figure 6-94.
Configure the day and period of arming. Click
Yes
to save the period
settings.
Anti-Dither
The system records only one alarm event within the set time, and the time
range is 0s
–100s.
Sensor Type
Normally open (NO) and normally closed (NC) are available.
Relay-out
Select the alarm output port.
Alarm Delay
The delay time of alarm after it is triggered.
Period setting
Figure 6-94
Click
OK
to save the configuration. Click
Refresh
to refresh the interface. Click
Default
Step 4
and then
OK
to restore to default settings.
6.5.5.1.2 Relay-out
You can simulate to trigger alarm output signal.
Select
Setting > Event > Alarm> Relay-out
.
Step 1
The
Relay-out
interface is displayed. See Figure 6-95.
Relay-out
Figure 6-95
