![Dahua Technology DHI-ITC352-RF2D User Manual Download Page 82](http://html.mh-extra.com/html/dahua-technology/dhi-itc352-rf2d/dhi-itc352-rf2d_user-manual_500717082.webp)
Web Configuration 75
Parameter
Description
Gain Mode
Auto Gain: Configure the range of auto gain.
Fixed Gain: Configure the fixed gain of camera.
Click
Snap Shutter
or
Recognition Shutter
to show the parameters relating to the
Step 3
shutter. To configure the parameters, refer to the table above.
Recognition shutter is only available in
Three Shutter
mode.
Click
OK
to save the configuration. Click
Refresh
to refresh the interface. Click
Default
Step 4
and then
OK
to restore to default settings.
6.5.2.1.3 Iris
You can adjust the aperture and configure the adjustment mode.
Select
Setting > Camera > Attributes > Iris
.
Step 1
The
Iris
interface is displayed. See Figure 6-84.
Iris
Figure 6-84
Configure the parameters. See Table 6-25.
Step 2
Table 6-25 Iris parameters
Parameter
Description
Mode
Two modes are available: Automatic and Force.
Iris Type
Select the type of lens currently used.
In
Automatic
mode, only
Manual
iris type is available.
In
Force
mode, several iris types are available.
Iris Adjust Mode
If you select iris type in
Force
mode, you need to configure the
Iris
Adjust Mode
, which includes:
Auto
and
Manual
.
If
Manual
is selected, you can manually drag the slider to adjust the
value or click
to turn on/off the lens, depends on the Iris Type
you select.
6.5.2.1.4 Metering Zone
You can configure measure mode and light compensation mode.