PILOT'S OPERATING HANDBOOK
SUPPLEMENT 67
DATA
COLLECTION
AND
TRANSMISSION
SYSTEM
(FASTBOX)
Edition 0 - September 15, 2017
Rev. 0
Page 9.67.4
SECTION 7
DESCRIPTION
Information hereafter supplement or replace those of the standard airplane described
in Section 7 Description of the basic Pilot's Operating Handbook when the airplane is
equipped
with
the
DATA
COLLECTION AND
TRANSMISSION
SYSTEM
(FASTBOX).
7.14 - MISCELLANEOUS EQUIPMENT
DATA COLLECTION AND TRANSMISSION SYSTEM (FASTBOX)
The data collection and transmission system collects data from aircraft data buses
and discrete inputs and store it in resident non-volatile memory.
When the aircraft is on the ground and a few minutes after the engine shut-down,
recorded data are automatically transmitted to a ground station via the cellular or WiFi
network. These data are intended to be used for maintenance and trend monitoring.
The data collection and transmission system records data from the GASC and data
from the GIA integrated avionics unit #1 (GARMIN integrated flight deck system).
The data collection and transmission system starts recording data as soon as the
crash lever is set upwards, and stops recording data when the crash lever is set
downwards.
The data collection and transmission system is installed in the front cargo
compartment, and does not require a pilot input to operate.
The data collection and transmission system is powered from the BATT BUS and
protected by the “REC” circuit breaker.
SECTION 8
HANDLING, SERVICING AND MAINTENANCE
Installation and operation of DATA COLLECTION AND TRANSMISSION SYSTEM
(FASTBOX) do not change the basic handling, servicing and maintenance
procedures of the airplane described in Section 8 Handling, Servicing and
Maintenance of the basic Pilot’s Operating Handbook.
PIM - DO NOT USE FOR FLIGHT OPERATIONS
