Pilot's Operating Handbook
Section 7
Description
Edition 0 - October 31, 2013
Rev. 4
Page 7.14.3
▲
CAUTION
▲
Reset the ELT after an inadvertent activation.
▲
Reset procedure :
1)
Set remote control switch or ELT switch to ON.
a)
The ELT keeps on transmitting emergency signal.
b)
On remote control box, red indicator light flashes.
c)
On ELT, red indicator light flashes.
d)
Near ELT, the buzzer sounds.
2)
Wait approximately for 1 second.
3)
Set remote control switch to ARM or ELT switch to OFF.
a)
The ELT does not transmit emergency signal any longer.
b)
On remote control box, red indicator light illuminates for about 1 second,
then goes off.
or
c)
On ELT, red indicator light goes off.
d)
Near ELT, the buzzer does no more sound.
Then ELT is reset.
End of procedure.
>> ELT ARTEX ME406
Operation of the emergency locator transmitter is obtained as follows :
-
from the instrument panel by setting ELT remote control switch to ON (locator
transmitter ON/ARM switch set to ARM),
-
from the locator transmitter by setting its ON/ARM control switch to ON,
-
automatically in case of shock, when remote control switch is set to ARM and
locator transmitter switch is set to ARM.
A red indicator light located on ELT remote control switch in the cockpit indicates to the
pilot the emergency locator transmitter is transmitting.
PIM - DO NOT USE FOR FLIGHT OPERATIONS
