Daewoo CB647M-EX, Manual

Page: 91 / 116

Quick Power On Self Te s t
- Allows the power on self test to run at either a
f a s t or a normal speed. The available options are :
- Enabled (default)
- Disabled
Boot Sequence
- Selects the drive where the system would search for the
operating system to run with. The available options are :
A, C, SCSI (default)
C, A, SCSI
C, CDROM, A CDROM, C, A
D, A, SCSI E, A, SCSI
F, A, SCSI SCSI, A, C
SCSI, C, A C only
L S / Z I P, C
Swap Floppy Drive
- “Enabled” will effectively change the A: drive to B:
and the B: to A: drive. “Disabled” (default) sets the floppy drives in their
default states.
- Disabled(default)
- Enabled
Boot Up Floppy Seek
- Check if the floppy drives installed on the system
a re correct or not. This option’s operation usually occurs when the
magnetic heads of the floppy drives produce a sound during power on
self test. The available options are :
- Enabled(default)
- Disabled
Boot Up NumLock Status
- This allows users to determine the default state
of the numeric keypad. By default, the system boots up with NumLock
o n .
- On (default)
- Off
Gate A20 Option
- Boots the performance of system with softwrae using
the 80286 protected mode such as OS/2 UNIX. This option determines
the accessibility of the extended memory. The available options are :
- FAST (default)
- Normal
3. Built-In BIOS Setup Program
3 - 9
CB647M-LX/EX(3장) 00.9.18 3:53 PM 페이지3-9