Daewoo CB647M-EX, Manual

Page: 97 / 116

3.4 Power Management Setup
ROM PCI/ISA BIOS (CB647MLX)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Figure 3 -5 Power Management Setup Screen
Power Management
- Allows user determine how often the Power Saving
activing. The available options are :
- Disable
- Max Saving
- Min Saving - User Define(default)
PM Control by APM
- Sets the power management(PM) control by the
A P M . The available options are :
- Yes (default)
- No
Video Off Method
- Sets the video power green method.
The available options are :
- V/H SYNC+Blank - DPMS(default)
- Blank Scre e n
3. Built-In BIOS Setup Program
3 - 1 5
Power Management : User Define
PM Control by APM : Yes
Video Off Method : DPMS
Video Off After : Standby
Modem Use IRQ : NA
Doze Mode : 4 Min
Standby Mode : 8 Min
Suspend Mode : 12 Min
HDD Power Down : Disable
Throttle Duty Cycle : 62.5%
ZZ Active in Suspend : Disabled
VGA Active Monitor : Disabled
Soft-Off by PWR-BTTN : Delay 4 Sec.
CPUFAN off Suspend
: Enabled
Resume by Ring : Disabled
Resume by Alarm : Disabled
Wake up On LAN : Disabled
IRQ 8 Break Suspend : Disabled
Reload Global Timer Events
IRQ [3-7, 9-15], NMI : Disabled
Primary IDE 0 : Enabled
Primary IDE 1 : Enabled
Secondary IDE 0 : Disabled
Secondary IDE 1 : Disabled
Floppy Disk : Enabled
Serial Port : Enabled
Parallel Port : Enabled
ESC : Quit ↑↓ ← : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Bios Defaults
F7 : Load Setup Defaults
CB647M-LX/EX(3장) 00.9.18 3:53 PM 페이지3-15