Daewoo CB647M-EX, Manual

Page: 19 / 116

Installing the celeron processor
1. Installing the URM
Installing the URM for celeron processor is same as Installing the URM for
Pentium-II pro c e s s o r.
2. Installing a CPU
Follow the steps below to install the celeron pro c e s s o r.
1. Locate the Slot 1 connector.
2. If you are installing the boxed version of the celeron pro c e s s o r, follow the
i n s t ructions in the section “3. Installing a CPU(Boxed version)” <page 2-9>
3. Line up the SEEP/heatsink, ensuring that the substrate key is line up
with the Slot 1 connector.
4. Insert SEPP into the guide rails along the URM. Place one hand on the
SEPP/heatsink combination and push into the Slot 1 connector.
5. You will hear a click as the URM pops back, thereby firmly locking the
p rocessor into the Slot 1 connector.
2. Installation
2 - 1 0
CB647M-LX/EX(2장) 00.9.18 3:53 PM 페이지2-10