Daewoo CB647M-EX, Manual

Page: 16 / 116

2. Installing a CPU
Follow the steps below to install the Pentium II pro c e s s o r :
1. Locate the Slot 1 connector.
2. If you are installing the boxed version of the Pentium II pro c e s s o r, follow
the instructions in the section “3. Installing a CPU (Boxed version)”
3. The Heatsink supporters consist of a top bar, base and two pins. Gently
insert the Heatsink base into the holes next to the Slot 1 socket. Push
down until the base snaps into place.
4. Lock the base into place by inserting a pin down into the base on the both
s i d e s .
5. Gently insert the processor cartridge down into the URM, making sure
the connector on the processor cartridge and Slot 1 connector are aligned.
6. Push the processor cartridge down until it snaps into place.
7. Lock the processor cartridge into place by pushing outward on the tabs
located on both sides of the processor cartridge. The processor cartridge is
locked when the tabs snap into the holes on the side of the URM.
8. After the processor cartridge is locked into place, connect the Heatsink’s
top bar to the base.
CB647M-LX/EX User's Manual
2 - 7
CB647M-LX/EX(2장) 00.9.18 3:52 PM 페이지2-7