Daewoo CB647M-EX, Manual

Page: 11 / 116

Set Jumpers
Serveral hard w a re settings are made through the use of jumper cap to
connect jumper pins on the motherboard. See motherboard layout on page
1-5 for location of jumpers. The jumper settings will be described numerically
such as '1-2', '2-3' or 'On(Short)', 'Off ( O p e n ) ' .
W a r n i n g !
Computer motherboards and Add-on cards contain very delicate IC
chips. To protect them against damage from static electricity, you
should follow some precaution whenever you work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handing computer components. If
you do not have one, touch both of your hands to a safely grounded
object or to a metal object, such as the power supply case.
3. Hold components by the edges and try not to touch such the IC
chips, leads or connectors, or other components.
4. Place components on a grounded anti-static pad or on the bag that
came with the component whenever the components are separated
from the system.
1. Clear CMOS RAM(JP10)
The CMOS RAM is powered by the onboard coin-cell battery or power
s u p p l y. To clear the CMOS Data : (1) Turn off your computer and unplug
your AC power, (2) Close pins 2-3, wait five seconds and place the jumper
back on pins 1-2. (The jumper must be placed back on pins 1-2 for the system
to function properly), (3) Turn on your computer.
2. CPU Core : BUS Frequency Multiple
To install the CPU at its correct fre q u e n c y, Please refer the following table to
set up CPU fre q u e n c y.
2. Installation
2 - 2
CB647M-LX/EX(2장) 00.9.18 3:52 PM 페이지2-2