Daewoo CB647M-EX, Manual

Page: 105 / 116

KB Power On Password
- This option will be shown only when the option
“Power On Function” is set to ‘Password’. You’ll be asked to input a
p a s s w o rd that you want to use as a password .
When the power code is disconnected abruptly or power source is
disappeared, you should press the Power Button before enter a password
that you decide to power-up the system. When you press the Power Button,
the screen shows you the following message :
Wa rning!!! Power cord is out.
System will shutdown.
and then system will be shutdown. After that, you can power-up the
system with your password .
Hot KEY Power On
- This option will be shown only when the option
“Power On Function” is set to ‘HOT-KEY’. This item asks you to select a
hot-key by which power-up the system. The available options are :
- Ctrl-F12
- PC98 KBD
PC98-KBD is available only when you are using PC98 Keyboard.
O n b o a rd FDC Contro l l e r
- Enables or Disables the FDD on-board
c o n t ro l l e r. The available options are :
- Enabled (default)
- Disabled
O n b o a rd Serial Port 1/2
- Sets the I/O address for serial port 1/2.
- Auto
- 3F8 / IRQ4 (default of port 1)
- 2F8 / IRQ3(default of port 2)
- 3E8 / IRQ4 - 2E8 / IRQ3
- Disabled
3. Built-In BIOS Setup Program
3 - 2 3
CB647M-LX/EX(3장) 00.9.18 3:53 PM 페이지3-23